home *** CD-ROM | disk | FTP | other *** search
-
- In article <4dgln1$crk$2@mhadf.production.compuserve.com> Kevin Allen <73652.2753@CompuServe.COM> writes:
- > Help I'm trying to add a 2nd SCSI drive to my 2091 card on my A2000 running
- > under 2.04. It's all installed and I can find it under the Sys/tools/hdtools
- > but it won't show up on my screen until I go there every time. Once, I
- > reboot its gone (the info is in it when I get it back) is there a way
- > I can have the drive there when I boot up? Help me please!
-
- Assuming you have the termination correct (are both drives internal with
- only the last one on the cable terminated?), then check the following.
-
- Go into HDToolBox, select the new drive, select Partition Drive. From that
- screen, select Advanced Options, then select Change File System for
- Partition. On that screen, check that the field "Automount this partition"
- says YES. If not, click in the box to change it, then select OK, and check
- the other partitions, if any. Select OK on the partition screen and Save
- Changes to the drive to exit, then reboot. The drive should now appear.
-
- One other possibility is that the roms on the 2091 may need to be updated
- if they are less than v6.6, I believe. Hope that helps.
-
- --
- Cheers,
- ---
- + _ ____________ tm Dale Currie ____ ___ _ +
- | /.\ .. | __ \ / dalec@amitrix.com / __[___]__ T tm |
- | /___\ /\/\ | | |_) | X support@amitrix.com / (o.o) | |
- | / \/ ^^ \ | | | \ | / \ BSA, WOTFM, / `-^-' | |
- |/ - D E V E L O P M E N T - \ AmiTrix /___ Z O R R O I N K !|
- + --------------------- Technical Support ---------------- +
-